All the interested students are requested to register online at below mentioned link for Quiz competition held on 12/8/15

https://docs.google.com/forms/d/1QwqKMyexA2V1EyYa3MX2BNCDhvfxYKu0NM98CAPZMW8/viewform?usp=send_form

Prof. A.K. Giri

Question Bank of Control System Engineering 

https://drive.google.com/file/d/0B5C3uSpGTqZ7WkdGeW1JbEQyNEk/view?usp=sharing

Prof. V.Y.Doshi and Prof. A.K.Giri , Prof. A.M.Shah

Question Bank For 7th sem ,SUB : APS_1 (170905)

               Question Bank

                Sub: APS-1 (170905)

     Chap-1

1.     Explain conventional control for active power in transmission system.

2.      Define reactive power. Explain significant of reactive power in power system.

3.     State conventional control methods for reactive power control in transmission line. Explain transformer tap changer control.

4.     Describe control of bus voltage using generator excitation.

5.     Explain operation of phase shifting transformer  in transmission line.

6.     Interpret word “FACTS” and classify FACTS controllers based on their connection.

7.     Describe emerging trends in transmission network.

8.     Explain role of UPFC in advanced power system.

9.     Describe operation and control of power transmission through automatic generation control.

  Chap-4

1.      Explain various types of links used in HVDC systems with necessary diagrams.

2.      Discuss the advantages of HVDC systems

3.      Explain briefly about different types of HVDC links

4.      Compare the HVDC transmission HVAC transmission with reference to following

factors:    Economics, Technical performance , Reliability.

5.      List out the different components of a point to point HVDC link and give the

6.      schematic arrangement at one end.

7.      Briefly explain the different types of DC links and why homo polar links are mostly used?

8.     Compare ac and dc transmission in terms of economics of transmission and technical performance

9.      Compare EHVAC link with HVDC link. Specify standard rated voltages of HVDC and EHVAC system.

10.  With neat schematic diagram, state the various apparatus required for HVDC  station and explain purpose of each

By:P.A.Upadhyay

MID-SEM SYLLABUS FOR SEM 3: SUB. ANALOG ELECTRONICS.

MODULE:2 FULL
MODULE:3 FULL
MODULE:1 AS PER SYLLABUS COVERED IN CLASSROOM.

BY: DRD/SIS

      NOTICE FOR QUIZ COMPETITION

All the students of 3rd ,5th ,7th semester  are informed that Quiz competition has to be conducted on 12/8/2015 at 1:00 P.M. in the department. You try to register as earliest possible.

Last date of Registration: 10/8/15

Registration fee: Rs 10/-  

First ,second and third ranked students will be awarded cash prize along with certificate. All the participants will be provided participation certificate.

Venue of the test: Class (R.NO.3006,3106,3107)

For More details contact to:

Student coordinators:

Mr. Pankaj - 8347006302

Mr. Bhargav Patel-7405779736

Faculty coordinator:

Prof. Ashutosh K Giri

MID SEM I Syllabus and Question Bank for Industrial Instrumentation

ELECTRICAL DEPARTMENT, GEC, BHARUCH

MID SEM I Syllabus Topics

Click here for II Question Bank

Subject: Industrial Instrumentation                                                                   Sem:07     

Transducers:

Introduction to instrumentation system, static and dynamic characteristics of an instrumentation system, Principles and classification of transducers, Electrical transducers, basic requirements of transducers

---

Temperature Measurement:

Resistance type temperature sensors – RTD & Thermister, Thermocouples & Thermopiles, Different types of Pyrometers. Humidity measurement and Moisture measurement techniques. infrared guns

---

Level Measurement:

Resistive, inductive and capacitive techniques for level measurement, Ultrasonic and radiation methods, Air purge system (Bubbler method).

---

Strain Gauge and Strain Measurement:

Factors affecting strain measurements, Types of strain gauges, theory of operation of resistive strain gauge, gauge factor, types of electrical strain gauges, strain gauge materials, gauging techniques and other factors, strain gauge circuits and temperature compensation, applications of strain gauges

---

Pressure Measurement:

Mechanical devices like Diaphragm, Bellows, and Bourdon tube for pressure measurement, Variable inductance and capacitance transducers, Piezo electric transducers, L.V.D.T. for measurement of pressure, Low pressure and vacuum pressure measurement using Pirani gauge, McLeod gauge, Ionization gauge, Pressure gauge calibration.

Faculty:

1)   PROF P.K.SHAH

2)   PROF. S.I.SHAH

MID SEM I Syllabus and Questiuon Bank (MICROPROCESSOR AND MICROCONTROLLER INTERFACING SEM-5)

ELECTRICAL DEPARTMENT, GEC, BHARUCH

MID SEM I Syllabus Topics

      

                               CLICK HERE FOR QUESTION BANK

SUBJECT: MICROPROCESSOR AND MICROCONTROLLER INTERFACING       SEM:05    

Review of logic devices and memories: Latches, Flip flops, Buffers, Controller buffer registers, Decoders Memory Cell, Internal organization of Memory Chips, Types of Memories Ram Rom PROM EPROM EEPROM, Flash Memory.

Microprocessor Based Systems: Digital Computer, Microprocessor, Microcomputer, Microcontroller, Van Neumann and Harvard Architecture, CISC and RISC Processors

8085 Microprocessor: Architectural Block Diagram, Schematic and Pin diagrams, Pin functions, Bus Organization, Internal operations and registers, Externally initiated operations, Serial interrupt and I/O Control, Brief Introduction of Instruction and assembly language Program, (Complete 8085 instruction set and Programming of assembly language 8085 should not be covered & asked in the exam) Timing and Control Unit ,Microprocessor communication, Multiplexing of address/data bus, Generation of control signals, 8085 machine cycles, Fetch and execution of only MOV, STA, and OUT instructions with timing diagram.

8051 Microcontroller architecture: Introduction to MCS -51 Family microcontrollers, Architectural block Diagram, Pin diagram and Pin 07 15 Suggested Specification table with Marks (Theory): Distribution of Theory Marks R Level U Level A Level N Level E Level C Level 20 20 30 10 10 10 Legends: R: Remembrance; U: Understanding; A: Application, N: Analyze and E: Evaluate C: Create and above Levels (Revised Bloom’s Taxonomy) Note: This specification table shall be treated as a general guideline for students and teachers. The actual distribution of marks in the question paper may vary slightly from above table. Functions General Purpose and Special Function Registers, , Oscillator and clock circuit, Reset circuit, I/O Port circuits, Memory organization, Internal program and data memory.

Introduction to Program Development Tools (IDE): Concept of IDE, Editor, Assembler, Compiler, Linker, Simulator, Debugger and assembler directives.

Assembly language programming: Programming model of 8051, Addressing modes, data transfer instructions, I/O Port programming, Arithmetic and Logical instructions, Bit level instructions, Branching instructions (Jump and loop Jump and call), Concept of stack, subroutine and related instructions, writing programs (like time delay using loop, data conversions HEX to ASCII, BCD to ASCII, use of look up table etc) in assembly language 8051 and testing the same using IDE.

Faculty:

1)   Prof. K.S.SHAH

2)   PROF P.K.SHAH

List of Guide for DE-2A (5th Sem) is atteched with following link. In case of any query, meet your guide or A. M. Shah

List of Guide for DE 2 A (5th Sem)

                                                        NOTICE FOR 5TH SEM STUDENTS
                                                                 MID SEM EXAM SYLLABUS
                                               SUBJECT: CONTROL SYSTEM ENGINEERING

1. Introduction to Control Systems: Introduction, Brief History of Automatic Control, Examples of Control Systems, Engineering Design, Mechatronic Systems, The Future Evolution of Control Systems.
2. Mathematical Models of Systems: Differential Equations of Physical Systems, Linear Approximations of Physical Systems, The Laplace Transform, The Transfer Function of Linear Systems, Block Diagram Models, Signal-Flow Graph Models.

3. State Variable Models: The State Variables of a Dynamic System, The State Differential Equation, The Transfer Function from the State Equation , The Time Response and the State Transition Matrix.

4. Feedback Control System Characteristics: Error Signal Analysis, Sensitivity of Control Systems to Parameter Variations ,Disturbance Signals in a Feedback Control System, Control of the Transient Response, Steady-State Error, The Cost of Feedback.

5. The Performance of Feedback Control Systems: Test Input Signals, Performance of Second-Order Systems, Effects of a Third Pole and a Zero on the Second-Order System Response, The s-Plane Root Location and the Transient Response, The Steady-State Error of Feedback Control Systems, Performance Indices, The Simplification of Linear Systems.

6. The Stability of Linear Feedback Systems: The Concept of Stability, The Routh-Hurwitz Stability Criterion, The Relative Stability of Feedback Control Systems

7. The Root Locus Method: The Root Locus Concept. The Root Locus
Procedure,

Faculty Members: Prof. V.Y.Doshi/Prof. A.K.Giri/Prof. A.M.Shah

Irregular Students List (3rd, 5th and 7th sem) Electrical Department, GEC, Bharuch.

3rd Semester:
Sr    Enroll No         Name
1    140140109002     AKASH PATEL
2    140140109006    BARIA RAHULKUMAR RAMESHBHAI
3    140140109022    DODIYA DHARMIKBHAI HARIBHAI
4    140140109038    KATARIA MARMIK DINESHCHANDRA
5    140140109056    MORE MEHULKUMAR VASANTBHAI
6    140140109057    MUKHERJEE SURAJIT SAMBHU
7    140140109062     PANCHAL HARSH
8     140140109078   PATEL MEHULKUMAR PRAVINBHAI
9     140140109096   RANAVAYA AKASH DILIPBHAI
10  140140109107     SHETH KETUL RAJENDRA

5th Semester:

Sr      Enroll No          Name
1     120140109054     Patel Parthkumar Rameshbhai
2     120140109125     KUMAR PANDOR NITIN P M B L BHAI
3     130140109003     BARIYA SATISH LAXMANBHAI
4     130140109004     BHANDERI HARDIKBHAI
5     120140109125     KUMAR PANDOR NITIN P M B L BHAI
6     130140109012     CHAVDA PINAL KHUSHALBHAI
7     130140109017     DESAI DHRUV MITESHKUMAR
8     130140109021     GAEED SAFVAN SIRAJ ABBAS
9     130140109022     GAUTAMKUMAR RATHVA
10   130140109023    GHETIYA JIGNESHKUMAR
11   130140109024    GONDALIYA RAVI MAGANBHAI
12   130140109025    GORAI JAYDEEP GOKULCHANDRA
13   130140109027    JADHAV KAJAL VIJAYBHAI
14   130140109028    JAIN MITALIBEN NARESHBHAI
15   130140109029   JARIWALA NITINKUMAR
16   130140109030   JHAVERI VISMAY NILESH
17   130140109032   KADAM HETA VASUDEV
18   130140109034   KAYASTH SAGARKUMAR UMESHKUMAR
19   130140109035   KHADELA MAHENDRA MOHANBHAI
20   130140109045   MASTER MUAATASIM MAHMADRAFIQ
21   130140109046   MISTRY ASHOKKUMAR MAHESHBHAI
22   130140109047   MISTRY PARTH DALPATBHAI
23   130140109050   MODH RAVIKUMAR VINODKUMAR
24   130140109051   PADHIYAR PRAHLADSINH RAYSINH
25   130140109052   PANASERIYA HITESH VINUBHAI
26   130140109063   PATEL BHAVESHKUMAR NARENDRABHAI
27   130140109065   PATEL HEMANTKUMAR
28   130140109066   PATEL HEMENDRA
29   130140109072   PATEL MEHUL MUKESH
30   130140109077   PATEL SANKETKUMAR ARUNBHAI
31   130140109083   PRAJAPATI HIMANEE
32   130140109084   PRAJAPATI NIKUNJ
33   130140109085   PRAJAPATI UTKARSH
34   130140109094   RATHVA JAYMINKUMAR JATANBHAI
35   130140109099   SHAH SMIT
36   130140109101   SHAIKH AAQUIBZAID SHAFIQUE
37   130140109102   SHOBHANI DEEPAK GORDHANBHAI
38   130140109105   SINDHAV HARSH LAKHUBHAI
39   130140109106   SISARA KISHORKUMAR RAMUBHAI
40   130140109109   SOLANKI RAVI
41   130140109111   TADVI MITESHKUMAR GOPALBHAI
42   130140109118   VARIA JYOTIBEN VIJAYKUMAR
43   140143109004   JHA PRIYANKA JITENDRA
44   140143109005   KAYASTH DIVYESHKUMAR MANOJBHAI
45   140143109015   PATEL RAJAN MAHESHBHAI
46   140143109019   SARVAIYA MIHIRKUMAR PRABHUDAS
47   140143109020   Shah Vatsal Kishorbhai
48   120140109080   pathar Milan

7th Semester:

Sr   Enroll No         Name
1       90140109119    PATEL PINKALKUMAR DAYALJIBHAI
2     120140109012    RADADIYA HARDIK VITTHALBHAI
3     120140109014    KHANDELWAL MOHAN RAMESHBHAI
4     120140109015    KAKADIYA CHIRAGKUMAR KARAMSHIBHAI
5     120140109035    FRUITWALA MAHENDIHUSAIN AIYUBBHAI
6     120140109052    PATEL JAY HARSHADBHAI
7     120140109081    PANCHAL AKSHAY MUKESHBHAI
8     120140109091    PATEL NIKUNJ AMRUTBHAI
9     120140109118    VASAVA DIVYESH UPENDRAKUMAR
10   120140109122    CHAUHAN AJAYKUMAR ARVINDBHAI
11   120140109126    RAVAT VIVEK KAMLESH
12   130143109019    PINJARI IRFAN HAROON
13   130143109027    VASAVA ANILKUMAR RAVJIBHAI