NOTICE FOR BASIC OF MECHANICAL ENGINEERING SUBJECT (1ST YEAR)

6th semester , Subject : DDCMT (2160912) Lab manual

Click here to view manual

	BE-Semester-4 ,Subject:AC Machines
	List of Practical perform/study in laboratory
Sr. No.	Name of Experiment
1	To study the constructional details of a three phase induction motor with the help of a cut section model.
2	To perform load test on a three phase induction motor.
3	To perform effect of voltage variation on three phase induction motor .
4	To perform no load and blocked rotor test on a three phase induction motor to find out its performance parameters with the help of  Equivalent circuit
5	To perform no load and blocked rotor test on a three phase induction motor to find out its performance parameters with the help of  Circle diagram
6	To study about the starters of three phases induction motors.
7	To perform the pole changing method of speed control for three phases induction motors.
8	To study the constructional details of a single phase induction motor with the help of a cut section model.
9	To study the constructional details of a three phase induction generator with the help of a cut section model.
10	To study the constructional details of a three phase synchronous machines with the help of a cut section model.
11	To perform open circuit, short circuit  tests on a synchronous generator (alternator) and find out its voltage regulation by Synchronous impedance method
12	To perform open circuit, short circuit tests on a synchronous generator (alternator) and find out its voltage regulation by MMF method
13	To perform direct load tests on a synchronous generator (alternator) and find out its voltage regulation.
14	To perform slip tests on a synchronous generator (alternator) and find out its voltage regulation by Xd & Xq method.

Meeting with Mentor & Notice Regarding I-Card Signature

All semester Students are informed to remain present in their classroom for meeting with Mentor at 17/01/2019 at 3:00 PM 

All  Students of Semester 4th,6th & 8th are hereby informed to take I-card Signature from Prof. H.C.Ejner (Room no-4008) between date 1/1/2019 to 9/1/2019.

Date extended for 100 activity registration of 2018-19 enrolled students

Date extended for 100 activity registration of 2018-19 enrolled students  (first year students).Those students who have not registered yet, they can register for 100 point activity till 31st December 2018.

REGARDING DESIGN ENGINEERING -I B FOR 4TH SEM AND DE II B 6TH SEM

ALL THE STUDENTS OF 4TH SEM ARE HEREBY INFORM TO  DO REGISTRATION FOR DESIGN ENGINEERING -1 B  BEFORE 5TH JANUARY  2019 ON DESIGN ENGINEERING PORTAL.
 Students need to take new project and branch specific other than 3rd sem project.

STUDENTS OF 6TH SEMESTER  CAN CONTINUE THEIR PROJECT FROM 5TH SEMESTER.

ALL THE STUDENTS HAVE TO STRICTLY FOLLOW THE SCHEDULE: Click here..

For other guidelines visit: http://de.gtu.ac.in/​ 

EVEN SEM_4,6,8 _18-19_BATCH DISTRIBUTION

CLICK HERE FOR BATCH_4,6,8_2018-19

Time-Table of Even Semester 2018-19

4-A: Click Here

4-B: Click Here

6-A: Click Here

6-B: Click Here

8-A: Click Here

8-B: Click Here

Recently, GTU (Gujarat Technological University ) has finalised the proposal & agreed with L&T Electrical & Automation for training of Pre-Final/Final Year Electrical Engineering Students. The same has been circulated to all the colleges (to Principal & TPO) under GTU. And the Circular for the same is hooked up on GTU Website dt: 31^st May18.

 The training program is for 3 Days / 5 Days. Student can opt for any of them.

 This Program is specially designed for the final year/pre-final year students of Diploma as well as Degree.

An Exert Lecture on “Campus to Corporate” is being arranged for students which is conducted by one of our Senior Management.

 All the details of this Student development program is contained within the Training brochure which can be seen as follows.

https://drive.google.com/file/d/1kfafl6qESHJgWoxOVxpGT2zft6ioF7dx/view?usp=sharing

Interested students can approach them  directly for registration as per mentioned schedule. But these students shall also take official permission from H.O.D of our department before going for training.

Prof. P.K.Shah

Regarding GTU Mid - Internal Marks

All students are informed to check their Mid -Internal marks on GTU Portal. Schedule is give below.

SEMESTER                                             DATE OF VIEW FOR STUDENT

     6,7,8                                                              8^th Dec, 2018  to 11^th Dec, 2018

     3,4,5                                                             14^th Dec, 2018 to 17^th Dec, 2018

If found any discrepancy in your marks , contact to concern subject teacher on or before last date of view date.  

Link for Viewing Mid -Internal Semester Examinations Marks for students: http://me.gtu.ac.in/Student/Studentmarkdisplay.aspx